Because of the variety of principles of medical air disinfection machines, there are diverse types. But the main types are plasma air machines and ultraviolet air disinfection machines. Compared with international advanced plasma disinfection machines and traditional ultraviolet circular air disinfectioners, they have the following advantages:

High -efficiency sterilization: ionic sterilization and disinfection effect, short action time, far lower than high -strength ultraviolet rays.

Environmental: ionic sterilization continues to work without avoiding ultraviolet rays, ozone, and environmental pollution.

Efficient degradation: While disinfection of the air, the ionic disinfectant can break down the harmful and toxic gases in the air. According to the test report of the China Disease Prevention and Control Center, the degradation rate within 24 hours: 91%formaldehyde, benzene 93%, ammonia 78 78 %, 96%toluene. At the same time, pollutants such as flue gas and smoke can be effectively removed.

Low energy consumption: The power of the ion air disinfection machine is one -third of the ultraviolet light disinfectant, which is very electricity. It is suitable for 150 rooms, 150W plasma, and 450W of ultraviolet light wires, which can save more than 1,000 won in one year.

Life is long: When the ionic disinfection machine is used normally, the design life is 15 years, and this disinfection machine is only 5 years. Medical air disinfection machine

One -time investment in consumables: The disinfectant needs to replace the lamp for about two years, and the cost is nearly 1,000 yuan. Plasma disinfectant does not require consumables for a lifetime.

What are the precautions for medical air disinfection machines?

For static disinfection or dynamic disinfection, doors and windows must be closed.

It is strictly forbidden to cover or block the inlet and exit of the disinfectant.

The power socket must use a 3 -core socket with a safe branch.

The water is strictly prohibited from entering the water, and the power should be cut off when cleaning the machine with a wet cloth.

In order to achieve the disinfection effect, it cannot exceed volume.

Check the working status of the machine regularly, and check immediately when discovering abnormalities. Electrical failures should be handled by professional and technical personnel.

Leave a Reply

Your email address will not be published. Required fields are marked *