Proper use of spray and precautions
- Check whether the power cord is damaged
- Turn the switch of the spray to the “Off” position before plugging in the power supply
- Adjust the nozzle to a proper position
- Do not spray flammable liquids such as acetone, benzene, gasoline, etc
- Do not block the air inlet
- Do not put foreign matters into the nozzle
- Three wire grounding socket shall be used
Maintenance after spray
- After spray, pour out excess liquid
- After the spray is installed, turn on the switch to spray for 1-2 minutes, and spray the excess liquid in the pipeline
- Add purified water into the tank and clean the tank and pipeline with spray for 10 minutes
- Wipe the surface of spray with 75% alcohol for standby
- Safety protection of dry fog disinfection personnel
- Clean clothes
- Goggles
- Gloves
- Breathing filter