Información sobre el sector de la descontaminación
Medical air disinfection machine manufacturers. Let’s talk about the characteristics of air disinfection machines
Through the pre -filters in the air disinfection machine, the dust collection and deodorization filter, the humidified filter of the waterwheel, the plasma generator, effectively filter the harmful substances such as indoor bacteria, PM2.5 , Sterilize, output very clean and hygienic air. Unveiling the front panel, the first -level filter is a pre -filter, which can filter large -volume pollutants such as dust and hair, and at the same time extend the service life of the dust collection net. After removing the pre -filter, you can see the dust collection and deodorization filter. The seemingly simple filter contains a variety of purification techniques. In order to deal with a variety of harmful bacteria in the air, soluble enzyme coating and tea coating were added to the dust removal and deodorized filter. Bio -soluase technology can be strongly corroded by hydrolysis of the original bacteria cell wall, cracking bacteria, and chain tea poison can lock the captured bacteria to lose its activity. Medical air disinfection machine manufacturers: Three different disinfection factors in air disinfection machines The air disinfection machine is mainly a device that uses physical and chemical methods to kill microorganisms in the indoor air, which can achieve independent operation.
Because of the variety of principles of medical air disinfection machines, there are diverse types. But the main types are plasma air machines and ultraviolet air disinfection machines. Compared with international advanced plasma disinfection machines and traditional ultraviolet circular air disinfectioners, they have the following advantages: High -efficiency sterilization: ionic sterilization and disinfection effect, short action time, far lower than high -strength ultraviolet rays. Environmental: ionic sterilization continues to work without avoiding ultraviolet rays, ozone, and environmental pollution. Efficient degradation: While disinfection of the air, the ionic disinfectant can break down the harmful and toxic gases in the air. According to the test report of the China Disease Prevention and Control Center, the degradation rate within 24 hours: 91%formaldehyde, benzene 93%, ammonia 78 78 %, 96%toluene. At the same time, pollutants such as flue gas and smoke can be effectively removed. Low energy consumption: The power of the ion air disinfection machine is one -third of the ultraviolet light disinfectant, which is very electricity. It is suitable for 150 rooms, 150W plasma, and 450W of ultraviolet light wires, which can save more than 1,000 won in one year. Life is long: When the ionic disinfection machine is used normally, the
The indoor air is filtered and filtered through the water inlet, filtering out large particles and sheet -like pollutants. The high -voltage electrostatic field generates new crowns and electricity, causing air electrostatic, and the dust particles collide with negative ions to generate a charge effect (including negative power). Under the influence of the electric field force, move to the dust collection plate (anode). Electronics, deposited on the dust plate. At the same time, under the impact and infiltration of high -energy cations in the air, the cell membrane and cell wall were destroyed and bacteria died. Later, the composite activated carbon filter removes the charge dust particles in the air to adsorb odors, ozone and toxic and harmful gases. Medical air disinfection machine 1) The killing effect of the medical air disinfectioner on microorganisms The bacterial removal process of the medical air disinfection can be briefly described as four stages: new crowns, bacterial charge, dust migration, and polar seal deposition. Medical air disinfection machine The high -voltage electrostatic field of the disinfection machine is a combined honeycomb high -voltage electrostatic field, which has the function of breaking bacterial cysts and sterilization. The killing rate of gas -soluble germ bacteria was
Medical air disinfection machines usually refer to disinfection equipment for air sterilization. Common air disinfectants are mainly composed of three main components. One is the power system (the motor provides power system). The second is the filter system (HEPA high -efficiency filter, activated carbon filter). Third, the disinfection system (ultraviolet, photocatalytic). Several important factors that choose air disinfectioners are too many particles such as dust in the living environment, and haze weather that affects people’s healthy life. Second, just as the newborn baby needs a clean air environment, the physical condition of the family is relatively fragile. Third, indoor passive smoking, oil fume and other environments; fourth, there are a large amount of bacteria, viruses growing, and air needed to disinfect the spring and summer season. How to maintain that medical air disinfectioner? The machine is specially responsible for special personnel, and it is on standby for 24 hours to prevent frequent start -up damage. Medical air disinfection machine Filter Management: Check the filter regularly. If the filter is found too much, it should be cleaned or replaced with water in time. During the replacement, open the filter cover, remove the filter network from the machine, replace it with a
After talking about the air disinfection machine, let’s take a look at the air purifier. The air purifier is also called “air cleaning device”, air fresh machine, and purifier, which refers to decoration pollution that can be adsorbed, decomposed or transformed in various air pollutants (generally includes PM2.5, dust, pollen, odor, formaldehyde and other decoration pollution , Bacteria, Allergens, etc.), products that effectively improve air cleanliness are mainly used as household appliances in daily life. There are many different technologies and media in the air purifier that allows it to provide users with clean and safe air. Commonly used air purification technology include: activated carbon adsorption technology, catalytic technology, super -structural optical mineralization technology, HEPA efficient filtering technology, static dust collection technology, etc.
First of all, the focus of the two is different. The definition of the air purifier from the relevant national standards is the household use of the particles, such as formaldehyde (such as formaldehyde), and microorganisms in the air. Similar use electrical appliances. · The measured value of the clean air volume of the particle and gaseous pollutants should not be less than 90%of the nominal value; · Run 1 hour in the simulation site and on -site test conditions, the antibacterial (sterilization) rate is ≥50%. The definition of air disinfection machines is a machine that uses physical, chemicals or other methods to kill, remove indoor air microorganisms, and meet disinfection requirements. In other words, the air disinfection machine tests the killing rate of germs, which has higher requirements for disinfection. · Simulation on -site experiments, the killing rate of Bacillus Bacillus should be ≥99.90%; · On -site tests, the fading rate of natural bacteria in the air should ≥90.0%(the above experiments must be repeated 3 times each, each time must meet the standards, and both meet the standards).